Johnson 2610F Wall Mount Sliding Door Hardware

2610F Wall Mount Sliding Door Hardware

The 2610F is a versatile and easy to install wall mounted sliding door hardware set ideally suited for application where the installation of a Pocket Door is not structurally possible or not cost effective. Possible applications include closets, storage rooms or anywhere space is limited and a wall mounted sliding door will suit. The 2610F is for interior use only and not suited for external applications.

• 200lbs [91kg] Max Weight Per Door
• 1" [25mm] to 1-3/4" [44mm] Door Thickness
• Top Mount Hanger Type
• Single Extrusion Box Rail Fascia Track Type
• 192" (16') [4877mm] Max. Track Length
• Mill Grade Aluminum Track Finish
• Commercial Grade Top Hung Wall Mount Sliding Door Hardware
*With Ball Bearing Hangers

2610F Hardware Sets

Wall mount sliding door hardware sets for standard door/opening installations (doors, jambs, opening trim, door locks, door pulls NOT included). Track CAN be cut down to fit smaller door/opening widths. Minimum 24" door width required for soft-close/open operation

How to order 2610F Hardware Sets:

1. Determine your door size (door width and door thickness)

2. Specify door weight (125lbs or 200lbs Max.)

3. Select a part set number that accommodates your door size and maximum door weight. Don't see your exact door size? Remember that track can be cut down to accommodate any smaller size door just order the next longer track length for your door and cut track down.